Wall lamps – The installation of a new wall lamp is one of the best ways to change the appearance of a room without having to invest too much money. There are many types of wall sconces available, including those that fit every style, décor, color scheme and budget. Wall sconces add general, task or accent lighting and can be used to complement other lighting fixtures within a room. Then, turn off the power to the existing wall lamp and loosen the existing lighting device. Also allowing it to hang down to expose the wiring. Use a circuit tester to check that the power supply is off. Unscrew the existing wire plugs to allow wiring to disconnect and remove the lamp.
Install the new wall lamp bracket. Aligning the screw holes of the level bracket to ensure the new fixture hangs level. Then, attach the black wire from the wall lamp to the black wire that comes from the electricity on the wall. And also attach the white wire on the candelabra to the white wire that comes from the electricity on the wall. The remaining cable that is attached is the copper wire. Connect the copper wire of the wall lamp with the copper wire on the wall. And then, use the plastic wire covers to twist the wires together in a permanent connection, one in each connection.
12 Picture Gallery: Ideas to Connect Wall Lamps
Push the wires back gently to the junction box while pushing the candelabrum into place and aligning it with the stand. Using the long screws that are included with the wall lamp, hold the light in place. Connect the power to the power outlet, the light is now ready to be used.
This post topic: Light Fixtures