Unfinished Basement Ceiling Ideas

Custom Unfinished Basement Ceiling

Unfinished basement ceiling – The first point to consider when insulating a basement roof is the basement. If the floor is concrete, then only some type of insulation can be mount in the ceiling. If the floor is the ground or the ground with a poly-vapor barrier, pay close attention to the type of material you use for insulation. The other factor to consider is that kind of isolation. The choice is fiberglass wadding, cotton wool and spray foam.

READ  The Most Popular Ceiling Studs

Determine the type of insulation you want to use. In most unfinished basement ceiling applications, fiberglass insulation should be power-faced fiberglass bat insulation. “Kraft-faced” means that fiberglass has a brown paper bag (force) on one side (face); the paper acts as a vapor barrier. Cotton wadding can be used in dry basement applications only when the floor is concrete and no water issues exist.

Determine the size of insulation unfinished basement ceiling requir. Both fiberglass and cotton wool are in some depth or thickness. Use R-19 or 5-inch thick insulation for a 2-by-6-inch rule. Use high density R-30 or 8-inch thick insulation for a 2-by-8-inch beam, R-30 or 10-inch thick insulation for a 2-by-10-inch beam and R-38 or 12-inch thick insulation for floor joints greater than 10 inches. “R” is the insulation industry the default value of insulation thermal resistors. Higher numbers indicate better thermal performance.

READ  Warmth Armstrong Wood Ceiling